Astronauts accidentally drop entire tool bag on spacewalk

By Dean Murray via SWNS

It's unfortunate when you drop your spanner in the garage, but when you drop an entire tool bag in space it's on another level of inconvenience.

NASA astronauts Jasmin Moghbeli and Loral O’Hara had an embarrassing incident on their spacewalk on November 1.

The pair spent 6 hours and 42 minutes outside the International Space Station (ISS) carrying out tasks that included fixing a solar power array.

However, while preparing to work on a communications electronics box, flight controllers spotted a tool bag spinning off into space.

An assessment was quickly made by NASA to work out whether the kit would smash into the space station. It was deemed low risk so it was left to drift away.

NASA has not revealed who may have been in charge of the tool bag.

The astronauts had planned to remove and stow a communications electronics box called the Radio Frequency Group, but there was not enough time during the spacewalk to complete the work.

The duo lifted some multilayer insulation to make a better assessment of how to approach the job before replacing the insulation and deferring the task to a future spacewalk.

NASA spokesperson Mark Garcia explains: "During the activity, one tool bag was inadvertently lost. Flight controllers spotted the tool bag using external station cameras.

"The tools were not needed for the remainder of the spacewalk. Mission Control analyzed the bag’s trajectory and determined that risk of recontacting the station is low and that the onboard crew and space station are safe with no action required."

Moghbeli and O’Hara were able to complete one of the spacewalk’s two major objectives, replacing one of the 12 trundle bearing assemblies on the port solar alpha rotary joint, which allows the arrays to track the Sun and generate electricity to power the station.

Mission Control told the station crew that the solar array is functioning well after the bearing replacement.

The spacewalkers also removed a handling bar fixture to prepare for future installation of a roll-out solar array and properly configured a cable that was previously interfering with an external camera.